Ho kenella ka potlako Tlhahiso e Phahameng ea DHD350 DTH Hammer

Kopo: Meepo, kaho, ho cheka, ho cheka, ho cheka, joalo-joalo.

Litšebeletso tsa Customization: Tšehetso bakeng sa ho itloaetsa

Sephutheloana: Lebokose la Lehong

Lebitso: HFD

HFD's DTH hamore le likotoana li entsoe ka tšepe ea boleng bo holimo ea alloy, e fanang ka ts'ebetso e phahameng, ts'ebetso e tsitsitseng le bophelo bo bolelele ba ts'ebeletso. Esita le tlas'a maemo a thata a majoe a senyang haholo, ts'ebetso ea eona e ke ke ea ameha, 'me lihlahisoa tsa rona li ratoa ke basebelisi ba bangata lefatšeng ka bophara.

Kopa qotso bakeng sa tlhaiso-leseling e batsi (MOQ, theko, thomello)

Arolelana:

Ho kenella ka potlako Tlhahiso e Phahameng ea DHD350 DTH Hammer :

Li-bits tsohle tsa HFD li entsoe ka thepa ea boleng bo holimo 'me li fumaneha e le likotoana tse tloaelehileng ka boholo bo fapaneng, ka mefuta e mengata ea li-shank le mefuta e fapaneng ea meralo e lumellanang le litlhoko tsa moreki ka mong bakeng sa merero e fapaneng ea ho cheka.

Re na le mefuta e 'maloa ea mefuta ea hamore ea DTH, eo u ka e nahanang, sekhahla sa ho kenella, ho ts'epahala, ts'ebeliso ea moea, matla a tšusumetso, bophelo ba hamore ho khetha hamore e loketseng ka ho fetisisa ea DTH.

Litlhaloso tsa Tekheniki:
Bolelele (Bonyane hanyane)	1209mm	Tšebeliso ea Moea
Boima ba 'mele	78.5kg	1.0Mpa	9m³/min
Bophara ba kantle	Φ125mm	1.8Mpa	15m³/min
Khoele ea Khokelo	API2 3/8"REG
Bit Shank	DHD350
Hole Range	Φ135-Φ155mm
khatello ea mosebetsi	1.0-2.5Mpa
Lebelo la ho potoloha le khothalelitsoeng	30-60 r/min


Ref	Likarolo	Boima ba 'mele	Ref	Likarolo	Boima ba 'mele
01	Top Sub	14.7Kg	09	Cylinder e haufi	4.9Kg
02	O Ring	0.02Kg	10	Piston	15.5Kg
03	Sheba Valofo	1Kg	11	Nyeoe ea Piston	30.3Kg
04	Selemo	0.06Kg	12	Retainer Ring	0.3Kg
05	Ring ea Ruegulate	0.1Kg	13	O Ring	0.01Kg
06	Rubber Buffer	0.06Kg	14	Khanna Chuck	7.1Kg
07	Pedestal	0.2Kg	15	Drill Bit
08	Setulo sa Valve	4.2Kg

Likarolo tsa HFD's DHD letoto la DTH hamore ke life?

1. E entsoe ka lisebelisoa tsa boleng bo phahameng ho fana ka ts'ebetso ea nako e telele bakeng sa ho cheka ha hao 'me e ka mamella maemo a thata le a matla a ho cheka ho sireletsa morero oa hau.

2. Ha ho bapisoa le lihlahisoa tse ling, theko ea rona e ntse e le tlhōlisano ka ho feletseng ha e ntse e tiisa boleng ba lihlahisoa tsa rona.

3.Tsusumetso e kholo e nang le tšebeliso e tlase ea motlakase. leqhubu la nako e telele, amplitude ea khatello ea maikutlo e tlase, 'me bophelo ba piston bo bolelele.

4. Li sebetsa hantle ka mekhoa e fapaneng ea majoe esita le mefuteng ea majoe a thata le a abrasive 'me li sebelisoa haholo merafong, kaho le boenjiniere ba geotechnical hammoho le lisebelisoa tse ling tsa ho cheka.

LBH:

1. Na u hlile u moetsi kapa feela khoebo khampani?

Re bobeli, re na le feme ea rona. Hape ho ba le lifeme tse ngata tsa likamano tse telele.

2.Bonyane palo ea odara ea hau ke efe?

MOQ ea rona ke 1pc kapa 1 sete e felletseng, theko e ka itšetleha ka bongata ba odara. Re amohela odara ea hau ea mohlala ho lekola boleng ba rona.

3. Ho thoe'ng ka Packing

Ho sebelisa linyeoe tsa ply-wood le pallet bakeng sa ho romela kantle ho naha ho sireletsa lihlahisoa le ho qoba tšenyo nakong ea lipalangoang.

Hape, re ka etsa sephutheloana ho ea ka likopo tsa hau tse khethehileng.

4. Ho thoe'ng ka nako ea ho pepa?

Ho itšetlehile, ka kakaretso ho nka matsatsi a 15-25. Haeba u na le li-stock, Hangata matsatsi a 5-10 feela haeba a le teng.

5.U ka khetha hamore e nepahetseng ea DTH joang?

1).Pls mpontše hore na u batla ho phunya lesoba la mofuta ofe.