Zuza Ukumba Okunembayo nge-QL DTH Hammer
Isicelo:Izimayini, ukwakha, ukumba inkwali, ukumba ukuhlola, ukuhlola igesi, njll.
Amasevisi okwenza ngokwezifiso: Usekelo lokwenza ngokwezifiso
Iphakheji: Ibhokisi Lezinkuni
Igama Brand: HFD
I-HFD QL DTH Hammer, ingxenye yayo, ingamathuluzi athembekile ezimbonini zezimayini nezobunjiniyela be-geotechnical. Lawa mathuluzi okumba athuthukile aqinisekisa ukusebenza kahle nokuthembekile kokumba ezimeni ezihlukahlukene ze-geological. Xhumana nathi ukuze ufunde kabanzi mayelana nemikhiqizo yethu ethembekile.
Cela ikhotheshini ukuze uthole imininingwane enemininingwane (MOQ, intengo, ukulethwa)
Zuza Ukumba Okunembayo nge-QL DTH Hammer :
Uchungechunge lwe-HFD lwe-QL i-DTH Hammer efakazelwe ukuguquguquka nokuthembeka kuyenza ibe yisinqumo esingcono kakhulu sokumba Imithombo, ukuhlola uwoyela negesi, izimbobo eziqhuma inkwali kanye nomsebenzi wokwakha.
Sinochungechunge oluningana lwezinhlobo zesando ze-DTH, ongazicabangela, izinga lokungena, ukwethembeka, ukusetshenziswa komoya, amandla omthelela, impilo yesando ukukhetha isando se-DTH esifaneleka kakhulu.
Ukucaciswa Kwezobuchwephesheion: | Ukucaciswa kwebhithi: | |||
Ubude (Kancane kancane) | 1335mm | |||
Isisindo | 188kg | |||
Ububanzi bangaphandle | Φ185mm | |||
Uchungechunge lokuxhuma | API4 1/2"REG | |||
I-Bit Shank | QL80A | |||
I-Hole Range | Φ198-Φ254mm | |||
ingcindezi yomsebenzi | 1.5-3.3Mpa | Ama-splines | 16 | |
Isivinini sokujikeleza esinconyiwe | 30-60 r/min | Ubude Be-Shank | 331 | |
Ukusetshenziswa Komoya | I-Bit Shank | QL80A | ||
1.8Mpa | 25m3/min | Ububanzi Bekhanda(mm) | Φ203-Φ305 | |
2.4Mpa | 34m3/min | Isisindo | 48.2kg-77.3kg |
Ref | Izingxenye | Isisindo | Ref | Izingxenye | Isisindo |
01 | Isihloko Esiphezulu | 38.5Kg | 09 | Umkhono womhlahlandlela | 10.5Kg |
02 | O Ndandatho | 0.02Kg | 10 | Indandatho Yokugcina | 1.2Kg |
03 | Hlola Valve | 0.65Kg | 11 | O Ndandatho | 0.01Kg |
04 | Intwasahlobo | 0.1Kg | 12 | Indandatho Yokugcina | 14.5Kg |
05 | Isihlalo seValve | 6.2Kg | 13 | I-Drill Bit | |
06 | I-Cylinder | 7.4Kg | |||
07 | I-Piston | 44.5Kg | |||
08 | Ikesi lePiston | 64.5Kg |
Kungani Khetha I-HFD's QL Series DTH Hammer?
1. Ukwamukela insimbi ye-alloy yekhwalithi ephezulu kanye nokwelashwa okuqinisa izingxenye ukuze kunwetshwe impilo yesevisi yesando esicwilisiwe.
I-2.Isakhiwo esilula, ukunciphisa ukuguga phakathi kwezingxenye ezisele, okulula ukugcinwa.
3.Adopt intambo eminingi ukuze uxhume i-sub and drive chuck, okulula ukuyihlanganisa.
I-4.Adopt indlela engeyona i-valve yokusabalalisa igesi, isakhiwo esilula, kulula ukuyi-Disassembly, izinzile.
5. Nge-valve engezansi noma ngaphandle kwayo. Idizayini ye-valve engezansi isiza ukuvimbela uthuli noma amanzi ukuthi angangeni esando, afaneleka ngokukhethekile ukubhoboza umthombo wamanzi noma ukubhoboza imbobo ejulile. Ayikho i-valve engezansi edingekayo, ukugwema ukwehluleka okubangelwa ukuphuka, ukulimala noma ukushintsha kwezinga lokushisa, nokwandisa umkhiqizo.
I-FAQ:
1. Ingabe ungumkhiqizi wangempela noma inkampani yokuhweba nje?
Sisobabili, sinefekthri yethu. Futhi ube nezimboni eziningi ezinobudlelwano obude.
2.Yini ubuncane be-oda lakho?
I-MOQ yethu iyi-1pc noma isethi engu-1 ephelele, intengo ingase incike enanini le-oda. Samukelekile i-oda lakho lesampula lokuhlola ikhwalithi yethu.
3. Kuthiwani ngokuPakisha?
Ukusebenzisa amakesi epulangwe kanye nephalethi ukuze kuthekeliswe imikhiqizo kanye nokugwema ukulimala ngesikhathi sokuthutha.
Futhi, singakwazi ukwenza ngokwezifiso iphakheji ngokusho kwezicelo zakho ezikhethekile.
4. Kuthiwani ngesikhathi sokulethwa?
Kuya ngokuthi, ngokuvamile kuthatha cishe izinsuku ezingu-15-25. Uma unezitoko, Imvamisa yizinsuku ezi-5-10 kuphela uma zisesitokweni.
5. Unga-oda kanjani?
1).Pls ngibonise ukuthi yimuphi usayizi wembobo ofuna ukuwubhoboza.
2).Mhlawumbe unaso isithombe sayo.
Izithombe ezihlobene:
I-HFD itholakala 7*24*365 unyaka wonke ukuze ikunikeze umhlahlandlela wokusebenza kanye nenkonzo yobuchwepheshe nganoma yisiphi isikhathi.