I-DTH Hammer And Drill Bit For Mining DHD3.5 bits
Isicelo:Izimayini, ukwakha, ukumba inkwali, ukumba ukuhlola, njll.
Amasevisi okwenza ngokwezifiso: Usekelo lokwenza ngokwezifiso
Iphakheji: Ibhokisi Lezinkuni
Igama Brand: HFD
I-DHD eyehla ngezimbobo zembobo idizayinelwe ukubhekana nokwakheka kwamatshe okuyinselele okuhlangatshezwana nayo emisebenzini yokumba amatshe. Idizayini ethuthukisiwe nokwakhiwa kwekhwalithi ephezulu kuvumela lezi zingcezu ukuthi zilethe isivinini esihle kakhulu sokumba kanye nempilo ende yebhithi, okuhlinzeka ukusebenza okuphakeme nokuhlala isikhathi eside kumaphrojekthi amaningi okumba ahlanganisa izimayini, ukwakhiwa kanye nokuhlola kwe-geotechnical.
Cela ikhotheshini ukuze uthole imininingwane enemininingwane (MOQ, intengo, ukulethwa)
I-DTH Hammer And Drill Bit For Mining DHD3.5 bits :
Onke amabhithi e-HFD akhiqizwa ngezinto ezisezingeni eliphezulu futhi atholakala njengezingcezu ezijwayelekile ezinosayizi abahlukene, anohlu olubanzi lwamashanki nezinhlobonhlobo zemiklamo ehambisana nezidingo zekhasimende ngalinye kumaphrojekthi ahlukene okumba.
Sinochungechunge oluningana lwezinhlobo zesando ze-DTH, ongazicabangela, izinga lokungena, ukwethembeka, ukusetshenziswa komoya, amandla omthelela, impilo yesando ukukhetha isando se-DTH esifaneleka kakhulu.
Ukucaciswa kobuchwepheshe: | |||
Ubude (Kancane kancane) | 928mm | Ukusetshenziswa Komoya | |
Isisindo | 25kg | 1.0Mpa | 4.5m3/min |
Ububanzi bangaphandle | Φ82mm | 1.5Mpa | 8.5m3/min |
Uchungechunge lokuxhuma | API2 3/8"REG | ||
I-Bit Shank | DHD3.5 | ||
I-Hole Range | Φ90-Φ110mm | ||
ingcindezi yomsebenzi | 1.0-1.7Mpa | ||
Isivinini sokujikeleza esinconyiwe | 30-60 r/min |
Ref | Izingxenye | Isisindo | Ref | Izingxenye | Isisindo |
01 | Isihloko Esiphezulu | 4.4Kg | 09 | Isilinda sangaphandle | 9.5Kg |
02 | O Ndandatho | 0.01Kg | 10 | Yima Ring | 0.1Kg |
03 | Hlola Valve | 0.2Kg | 11 | O Ndandatho | 0.01Kg |
04 | Intwasahlobo | 0.02Kg | 12 | Shayela uChuck | 2.1Kg |
05 | I-Rubber Buffer | 0.02Kg | 13 | I-Drill Bit | |
06 | Isihlalo seValve | 1.4Kg | |||
07 | I-Cylinder | 1.7Kg | |||
08 | I-Piston | 5.6Kg |
Yiziphi izici zochungechunge lwe-HFD DHD isando se-DTH?
1. Yenziwe ngezinto ezisezingeni eliphezulu ukuze inikeze ukusebenza okuhlala isikhathi eside kokubhola kwakho futhi ingamelana nezimo ezinzima neziqinile zokumba ukuze uvikele iphrojekthi yakho.
2. Uma kuqhathaniswa nezinye izinhlobo, intengo yethu isaqhudelana ngokuphelele kuyilapho iqinisekisa ikhwalithi yemikhiqizo yethu.
3.Umfutho omkhulu ngokusetshenziswa okuphansi kogesi.ubude begagasi bude, i-amplitude yokucindezeleka iphansi, futhi impilo ye-piston yinde.
4. Asebenza kahle ekwakhiweni kwamadwala ahlukene ngisho nasezinhlotsheni zamatshe aqinile futhi abrasive futhi asetshenziswa kakhulu ezimayini, ezokwakha kanye nobunjiniyela be-geotechnical kanye nezinye izinhlelo zokusebenza zokumba.
I-FAQ:
1. Ingabe ungumkhiqizi wangempela noma inkampani yokuhweba nje?
Sisobabili, sinefekthri yethu. Futhi ube nezimboni eziningi ezinobudlelwano obude.
2.Yini ubuncane be-oda lakho?
I-MOQ yethu iyi-1pc noma isethi engu-1 ephelele, intengo ingase incike enanini le-oda. Samukelekile i-oda lakho lesampula lokuhlola ikhwalithi yethu.
3. Kuthiwani ngokupakisha
Ukusebenzisa amakesi epulangwe kanye nephalethi ukuze kuthekeliswe imikhiqizo kanye nokugwema ukulimala ngesikhathi sokuthutha.
Futhi, singakwazi ukwenza ngokwezifiso iphakheji ngokusho kwezicelo zakho ezikhethekile.
4. Kuthiwani ngesikhathi sokulethwa?
Kuya ngokuthi, ngokuvamile kuthatha cishe izinsuku ezingu-15-25. Uma unezitoko, Imvamisa yizinsuku ezi-5-10 kuphela uma zisesitokweni.
5.Ungakhetha kanjani isando se-DTH esifanele?
1).Pls ngibonise ukuthi yimuphi usayizi wembobo ofuna ukuwubhoboza.
2).Mhlawumbe unaso isithombe sayo.
Izithombe ezihlobene:
I-HFD itholakala 7*24*365 unyaka wonke ukuze ikunikeze umhlahlandlela wokusebenza kanye nenkonzo yobuchwepheshe nganoma yisiphi isikhathi.