Finyella ho Epa ka nepo ka QL DTH Hammer

Kopo: Merafo, kaho, ho cheka, ho cheka, ho cheka, ho hlahloba khase, joalo-joalo.

Litšebeletso tsa Customization: Tšehetso bakeng sa ho itloaetsa

Sephutheloana: Lebokose la Lehong

Lebitso: HFD

HFD QL DTH Hammer, e leng karolo ea, ke lisebelisoa tse tšeptjoang indastering ea merafo le ea boenjineri ba geotechnical. Lisebelisoa tsena tse tsoetseng pele tsa ho cheka li netefatsa ts'ebetso ea ho cheka e sebetsang hantle le e tšepahalang maemong a fapaneng a jeoloji. Ikopanye le rona ho ithuta haholoanyane ka lihlahisoa tsa rona tse tšepahalang.

Kopa qotso bakeng sa tlhaiso-leseling e batsi (MOQ, theko, thomello)

Arolelana:

Finyella ho Epa ka nepo ka QL DTH Hammer :

HFD's QL letoto la DTH Hammer e netefalitsoeng le ho ts'epahala e e etsa khetho e ntle ka ho fetisisa bakeng sa ho cheka Liliba, ho phenyekolla oli le khase, masoba a phatlohileng likoring le mosebetsi oa kaho.

Re na le mefuta e 'maloa ea mefuta ea hamore ea DTH, eo u ka e nahanang, sekhahla sa ho kenella, ho ts'epahala, ts'ebeliso ea moea, matla a tšusumetso, bophelo ba hamore ho khetha hamore e loketseng ka ho fetisisa ea DTH.

Lintlha tse Khethehilengion:			Tlhaloso ea Bit:
Bolelele (Bonyane hanyane)		1335mm
Boima ba 'mele		188kg
Bophara ba kantle		Φ185mm
Khoele ea Khokelo		API4 1/2"REG
Bit Shank		QL80A
Hole Range		Φ198-Φ254mm
khatello ea mosebetsi		1.5-3.3Mpa	Li-splines	16
Lebelo la ho potoloha le khothalelitsoeng		30-60 r/min	Bolelele ba Shank	331
Tšebeliso ea Moea			Bit Shank	QL80A
1.8Mpa	25m3/min		Bophara ba Hlooho(mm)	Φ203-Φ305
2.4Mpa	34m3/min		Boima ba 'mele	48.2kg-77.3kg


Ref	Likarolo	Boima ba 'mele	Ref	Likarolo	Boima ba 'mele
01	Top Sub	38.5Kg	09	Leqhetso la tataiso	10.5Kg
02	O Ring	0.02Kg	10	Retainer Ring	1.2Kg
03	Sheba Valofo	0.65Kg	11	O Ring	0.01Kg
04	Selemo	0.1Kg	12	Retainer Ring	14.5Kg
05	Setulo sa Valve	6.2Kg	13	Drill Bit
06	Cylinder e haufi	7.4Kg
07	Piston	44.5Kg
08	Nyeoe ea Piston	64.5Kg

Hobaneng u Khetha HFD's QL Series DTH Hammer?

1. Ho amohela tšepe ea boleng bo phahameng ea alloy le phekolo e thata bakeng sa likarolo ho lelefatsa bophelo ba tšebeletso ea hamore e qoelitsoeng.

2.Mohaho o bonolo, o fokotsa ho senya le ho senya pakeng tsa likarolo tse ling, tse bonolo bakeng sa tlhokomelo.

3.Adopt multiple thread ho hokahanya sub le drive chuck, e leng bonolo bakeng sa dis-assembly.

4.Adopt tsela e se nang valve ea ho fana ka khase, mohaho o bonolo, o bonolo ho Disassembly, o tsitsitseng haholoanyane.

5. Ka kapa ntle le valve e ka tlaase. Moralo oa li-valve tse ka tlase o thusa ho thibela lerōle kapa metsi ho kena hamore, haholo-holo e loketseng ho cheka seliba sa metsi kapa ho phunya lesoba le tebileng. Ha ho hlokahale valve e ka tlaase, ho qoba ho hlōleha ho bakoang ke ho robeha, ho senyeha kapa ho fetoha ha mocheso, le ho eketsa tlhahiso.

LBH:

1. Na u hlile u moetsi kapa feela khoebo khampani?

Re bobeli, re na le feme ea rona. Hape ho ba le lifeme tse ngata tsa likamano tse telele.

2.Bonyane palo ea odara ea hau ke efe?

MOQ ea rona ke 1pc kapa 1 sete e felletseng, theko e ka itšetleha ka bongata ba odara. Re amohela odara ea hau ea mohlala ho lekola boleng ba rona.

3. Ho thoe'ng ka Packing?

Ho sebelisa linyeoe tsa ply-wood le pallet bakeng sa ho romela kantle ho naha ho sireletsa lihlahisoa le ho qoba tšenyo nakong ea lipalangoang.

Hape, re ka etsa sephutheloana ho ea ka likopo tsa hau tse khethehileng.

4. Ho thoe'ng ka nako ea ho fana?

Ho itšetlehile, ka kakaretso ho nka matsatsi a 15-25. Haeba u na le li-stock, Hangata matsatsi a 5-10 feela haeba a le teng.

5. Joang ho Odara?

1).Pls mpontše hore na u batla ho phunya lesoba la mofuta ofe.