Ntlafatsa ho Drilling ea Hao ea Rock ka QL DTH Hammer

Kopo: Merafo, kaho, ho cheka, ho cheka, ho cheka, ho hlahloba khase, joalo-joalo.

Litšebeletso tsa Customization: Tšehetso bakeng sa ho itloaetsa

Sephutheloana: Lebokose la Lehong

Lebitso: HFD

E hahiloe ka boitlamo ba HFD ba boleng le ho tšoarella, letoto la QL DTH hamore le na le thepa ea boleng bo holimo le kaho e matla. E etselitsoe ho mamella maemo a thata le meroalo e boima ea mosebetsi, e netefatsa ts'ebetso e tšoarellang nako e telele, nako e fokolang, le tlhahiso e phahameng haholo sebakeng sa mosebetsi.

Kopa qotso bakeng sa tlhaiso-leseling e batsi (MOQ, theko, thomello)

Arolelana:

Ntlafatsa ho Drilling ea Hao ea Rock ka QL DTH Hammer :

HFD's QL letoto la DTH Hammer e netefalitsoeng le ho ts'epahala e e etsa khetho e ntle ka ho fetisisa bakeng sa ho cheka Liliba, ho phenyekolla oli le khase, masoba a phatlohileng likoring le mosebetsi oa kaho.

Re na le mefuta e 'maloa ea mefuta ea hamore ea DTH, eo u ka e nahanang, sekhahla sa ho kenella, ho ts'epahala, ts'ebeliso ea moea, matla a tšusumetso, bophelo ba hamore ho khetha hamore e loketseng ka ho fetisisa ea DTH.

Lintlha tse Khethehilengion:			Tlhaloso ea Bit:
Bolelele (Bonyane hanyane)		1102mm
Boima ba 'mele		43.7kg
Bophara ba kantle		Φ99mm
Khoele ea Khokelo		API2 3/8"REG
Bit Shank		QL40
Hole Range		Φ110-Φ135mm
khatello ea mosebetsi		1.0-2.2Mpa	Li-splines	10
Lebelo la ho potoloha le khothalelitsoeng		30-60 r/min	Bolelele ba Shank	280
Tšebeliso ea Moea			Bit Shank	QL40
1.0Mpa	5.5m3/min		Bophara ba Hlooho(mm)	Φ108-Φ130
1.8Mpa	10m3/min		Boima ba 'mele	9.42kg-10.9kg


Ref	Likarolo	Boima ba 'mele	Ref	Likarolo	Boima ba 'mele
01	Top Sub	8.8Kg	09	Nyeoe ea Piston	16.5Kg
02	O Ring	0.01Kg	10	Leqhetso la tataiso	0.9Kg
03	Sheba Valofo	0.46Kg	11	Retainer Ring	0.2Kg
04	Selemo	0.04Kg	12	O Ring	0.01Kg
05	Rubber Buffer	0.2Kg	13	Khanna Chuck	3.3Kg
06	Setulo sa Valve	2.1Kg	14	Drill Bit
07	Cylinder e haufi	2.45Kg
08	Piston	8.8Kg

Hobaneng u Khetha HFD's QL Series DTH Hammer?

1. Ho amohela tšepe ea boleng bo phahameng ea alloy le phekolo e thata bakeng sa likarolo ho lelefatsa bophelo ba tšebeletso ea hamore e qoelitsoeng.

2.Mohaho o bonolo, o fokotsa ho senya le ho senya pakeng tsa likarolo tse ling, tse bonolo bakeng sa tlhokomelo.

3.Adopt multiple thread ho hokahanya sub le drive chuck, e leng bonolo bakeng sa dis-assembly.

4.Adopt tsela e se nang valve ea ho fana ka khase, mohaho o bonolo, o bonolo ho Disassembly, o tsitsitseng haholoanyane.

5. Ka kapa ntle le valve e ka tlaase. Moralo oa li-valve tse ka tlase o thusa ho thibela lerōle kapa metsi ho kena hamore, haholo-holo e loketseng ho cheka seliba sa metsi kapa ho phunya lesoba le tebileng. Ha ho hlokahale valve e ka tlaase, ho qoba ho hlōleha ho bakoang ke ho robeha, ho senyeha kapa ho fetoha ha mocheso, le ho eketsa tlhahiso.

LBH:

1. Na u hlile u moetsi kapa feela khoebo khampani?

Re bobeli, re na le feme ea rona. Hape ho ba le lifeme tse ngata tsa likamano tse telele.

2.Bonyane palo ea odara ea hau ke efe?

MOQ ea rona ke 1pc kapa 1 sete e felletseng, theko e ka itšetleha ka bongata ba odara. Re amohela odara ea hau ea mohlala ho lekola boleng ba rona.

3. Ho thoe'ng ka Packing?

Ho sebelisa linyeoe tsa ply-wood le pallet bakeng sa ho romela kantle ho naha ho sireletsa lihlahisoa le ho qoba tšenyo nakong ea lipalangoang.

Hape, re ka etsa sephutheloana ho ea ka likopo tsa hau tse khethehileng.

4. Ho thoe'ng ka nako ea ho fana?

Ho itšetlehile, ka kakaretso ho nka matsatsi a 15-25. Haeba u na le li-stock, Hangata matsatsi a 5-10 feela haeba a le teng.

5. Joang ho Odara?

1).Pls mpontše hore na u batla ho phunya lesoba la mofuta ofe.