Hlahloba Boleng bo Phahameng: QL DTH Hammer

Kopo: Merafo, kaho, ho cheka, ho cheka, ho cheka, ho hlahloba khase, joalo-joalo.

Litšebeletso tsa Customization: Tšehetso bakeng sa ho itloaetsa

Sephutheloana: Lebokose la Lehong

Lebitso: HFD

Hamore ea HFD QL DTH e kopanya theknoloji e tsoetseng pele le boqapi bo phahameng, e fanang ka ts'ebetso e ke keng ea lekanngoa le ho ts'epahala ts'ebetsong ea ho cheka. E entsoe ka ho nepahala le ho tšoarella kelellong, e netefatsa litekanyetso tse ikhethang tsa ho kenella le phetisetso e nepahetseng ea matla, e e etsa khetho e nepahetseng bakeng sa lits'ebetso tse fapaneng tsa ho cheka.

Kopa qotso bakeng sa tlhaiso-leseling e batsi (MOQ, theko, thomello)

Arolelana:

Hlahloba Boleng bo Phahameng: QL DTH Hammer :

HFD's QL letoto la DTH Hammer e netefalitsoeng le ho ts'epahala e e etsa khetho e ntle ka ho fetisisa bakeng sa ho cheka Liliba, ho phenyekolla ha oli le khase, masoba a phatlohileng koari le mosebetsi oa kaho.

Re na le mefuta e 'maloa ea mefuta ea hamore ea DTH, eo u ka e nahanang, sekhahla sa ho kenella, ho ts'epahala, ts'ebeliso ea moea, matla a tšusumetso, bophelo ba hamore ho khetha hamore e loketseng ka ho fetisisa ea DTH.

Lintlha tse Khethehilengion:			Tlhaloso ea Bit:
Bolelele (Bonyane hanyane)		1155mm
Boima ba 'mele		102kg
Bophara ba kantle		Φ148mm
Khoele ea Khokelo		API3 1/2"REG
Bit Shank		QL60A
Hole Range		Φ158-Φ203mm
khatello ea mosebetsi		1.2-2.7Mpa	Li-splines	12
Lebelo la ho potoloha le khothalelitsoeng		30-60 r/min	Bolelele ba Shank	253
Tšebeliso ea Moea			Bit Shank	QL60A
1.8Mpa	16m3/min		Bophara ba Hlooho(mm)	Φ154-Φ203
2.4Mpa	23m3/min		Boima ba 'mele	22.5kg-29.7kg


Ref	Likarolo	Boima ba 'mele	Ref	Likarolo	Boima ba 'mele
01	Top Sub	21.5Kg	09	Nyeoe ea Piston	34.3Kg
02	O Ring	0.01Kg	10	Leqhetso la tataiso	5.4Kg
03	Disc Spring	0.34Kg	11	Circlip	0.02Kg
04	Sheba Valofo	0.56Kg	12	Retainer Ring	0.92Kg
05	Selemo	0.05Kg	13	O Ring	0.01Kg
06	Setulo sa Valve	4.3Kg	14	Khanna Chuck	7.5Kg
07	Cylinder e haufi	4.2Kg	15	Drill Bit
08	Piston	23Kg

Hobaneng u Khetha HFD's QL Series DTH Hammer?

1. Ho amohela tšepe ea boleng bo phahameng ea alloy le phekolo e thata bakeng sa likarolo ho lelefatsa bophelo ba tšebeletso ea hamore e ka tlas'a metsi.

2.Mohaho o bonolo, o fokotsa ho senya le ho senya pakeng tsa likarolo tse ling, tse bonolo bakeng sa tlhokomelo.

3.Adopt multiple thread ho hokahanya sub le drive chuck, e leng bonolo bakeng sa dis-assembly.

4.Adopt tsela e se nang valve ea ho fana ka khase, mohaho o bonolo, o bonolo ho Disassembly, o tsitsitseng haholoanyane.

5. Ka kapa ntle le valve e ka tlaase. Moralo oa li-valve tse ka tlase o thusa ho thibela lerōle kapa metsi ho kena hamoreng, haholo-holo e loketseng ho cheka seliba sa metsi kapa ho phunya lesoba le tebileng. Ha ho hlokahale valve e ka tlaase, ho qoba ho hlōleha ho bakoang ke ho robeha, ho senyeha kapa ho fetoha ha mocheso, le ho eketsa tlhahiso.

LBH:

1. Na u hlile u moetsi kapa feela khoebo khampani?

Re bobeli, re na le feme ea rona. Hape ho ba le lifeme tse ngata tsa likamano tse telele.

2.Bonyane palo ea odara ea hau ke efe?

MOQ ea rona ke 1pc kapa 1 sete e felletseng, theko e ka itšetleha ka bongata ba odara. Re amohela odara ea hau ea mohlala ho lekola boleng ba rona.

3. Ho thoe'ng ka Packing?

Ho sebelisa linyeoe tsa ply-wood le pallet bakeng sa ho romela kantle ho naha ho sireletsa lihlahisoa le ho qoba tšenyo nakong ea lipalangoang.

Hape, re ka etsa sephutheloana ho latela likopo tsa hau tse khethehileng.

4. Ho thoe'ng ka nako ea ho fana?

Ho itšetlehile, ka kakaretso ho nka matsatsi a 15-25. Haeba u na le li-stock, Hangata matsatsi a 5-10 feela haeba a le setokong.

5. Joang ho Odara?

1).Pls mpontše hore na u batla ho phunya lesoba la mofuta ofe.