Fumana Theknoloji e tsoetseng pele: QL DTH Hammer

Kopo: Merafo, kaho, ho cheka, ho cheka, ho cheka, ho hlahloba khase, joalo-joalo.

Litšebeletso tsa Customization: Tšehetso bakeng sa ho itloaetsa

Sephutheloana: Lebokose la Lehong

Lebitso: HFD

HFD QL DTH hamore e na le moralo o tsoetseng pele o entsoeng ke sehlopha sa rona sa litsebi, o kenyelletsang matla a macha a phallo ea moea le likarolo tsa kahare tse ntlafalitsoeng. Moralo ona o ntlafatsa phetiso ea matla, e bakang lebelo le potlakileng la ho cheka le ho fokotsa litšenyehelo tsa ts'ebetso bakeng sa bareki ba rona.

Kopa qotso bakeng sa tlhaiso-leseling e batsi (MOQ, theko, thomello)

Arolelana:

Fumana Theknoloji e tsoetseng pele: QL DTH Hammer :

HFD's QL letoto la DTH Hammer e netefalitsoeng le ho ts'epahala e e etsa khetho e ntle ka ho fetisisa bakeng sa ho cheka Liliba, ho phenyekolla oli le khase, masoba a phatlohileng likoring le mosebetsi oa kaho.

Re na le mefuta e 'maloa ea mefuta ea hamore ea DTH, eo u ka e nahanang, sekhahla sa ho kenella, ho ts'epahala, ts'ebeliso ea moea, matla a tšusumetso, bophelo ba hamore ho khetha hamore e loketseng ka ho fetisisa ea DTH.

Lintlha tse Khethehilengion:			Tlhaloso ea Bit:
Bolelele (Bonyane hanyane)		1102mm
Boima ba 'mele		68.5kg
Bophara ba kantle		Φ126mm
Khoele ea Khokelo		API2 3/8"REG
Bit Shank		QL50A
Hole Range		Φ136-Φ155mm
khatello ea mosebetsi		1.0-2.5Mpa	Li-splines	12
Lebelo la ho potoloha le khothalelitsoeng		30-60 r/min	Bolelele ba Shank	240
Tšebeliso ea Moea			Bit Shank	QL50A
1.0Mpa	7m3/min		Bophara ba Hlooho(mm)	Φ140-Φ178
1.8Mpa	13m3/min		Boima ba 'mele	15.3kg-20kg


Ref	Likarolo	Boima ba 'mele	Ref	Likarolo	Boima ba 'mele
01	Top Sub	14Kg	09	Leqhetso la tataiso	2.75Kg
02	O Ring	0.01Kg	10	Retainer Ring	0.45Kg
03	Sheba Valofo	0.6Kg	11	O Ring	0.01Kg
04	Selemo	0.06Kg	12	Khanna Chuck	5.4Kg
05	Setulo sa Valve	2.15Kg	13	Drill Bit
06	Cylinder e haufi	3.3Kg
07	Piston	15.5Kg
08	Nyeoe ea Piston	24.2Kg

Hobaneng u Khetha HFD's QL Series DTH Hammer?

1. Ho amohela tšepe ea boleng bo phahameng ea alloy le phekolo e thata bakeng sa likarolo ho lelefatsa bophelo ba tšebeletso ea hamore e qoelitsoeng.

2.Mohaho o bonolo, o fokotsa ho senya le ho senya pakeng tsa likarolo tse ling, tse bonolo bakeng sa tlhokomelo.

3.Adopt multiple thread ho hokahanya sub le drive chuck, e leng bonolo bakeng sa dis-assembly.

4.Adopt tsela e se nang valve ea ho fana ka khase, mohaho o bonolo, o bonolo ho Disassembly, o tsitsitseng haholoanyane.

5. Ka kapa ntle le valve e ka tlaase. Moralo oa li-valve tse ka tlase o thusa ho thibela lerōle kapa metsi ho kena hamore, haholo-holo e loketseng ho cheka seliba sa metsi kapa ho phunya lesoba le tebileng. Ha ho hlokahale valve e ka tlaase, ho qoba ho hlōleha ho bakoang ke ho robeha, ho senyeha kapa ho fetoha ha mocheso, le ho eketsa tlhahiso.

LBH:

1. Na u hlile u moetsi kapa feela khoebo khampani?

Re bobeli, re na le feme ea rona. Hape ho ba le lifeme tse ngata tsa likamano tse telele.

2.Bonyane palo ea odara ea hau ke efe?

MOQ ea rona ke 1pc kapa 1 sete e felletseng, theko e ka itšetleha ka bongata ba odara. Re amohela odara ea hau ea mohlala ho lekola boleng ba rona.

3. Ho thoe'ng ka Packing?

Ho sebelisa linyeoe tsa ply-wood le pallet bakeng sa ho romela kantle ho naha ho sireletsa lihlahisoa le ho qoba tšenyo nakong ea lipalangoang.

Hape, re ka etsa sephutheloana ho ea ka likopo tsa hau tse khethehileng.

4. Ho thoe'ng ka nako ea ho fana?

Ho itšetlehile, ka kakaretso ho nka matsatsi a 15-25. Haeba u na le li-stock, Hangata matsatsi a 5-10 feela haeba a le teng.

5. Joang ho Odara?

1).Pls mpontše hore na u batla ho phunya lesoba la mofuta ofe.